# ProxMon

  

Prometheus exporter that monitors LXC, process and node metrics for Proxmox. This is comprised of two components:
 1. node-exporter
	 - Publicly available "node exporter" from Prometheus. This provides a wide range of system metrics, and by default serves metrics on port 9100.
	 - Pre-built binary in this repo for ease of installation.
	 - Configuration details can be found [here](https://github.com/prometheus/node_exporter).
 2. proxmon
	 - Provides supplemental metrics that node-exporter does not provide, and by default serves metrics on port 9101.
	 - Metrics include resource usage on a per-LXC and per-process basis.

Also included is a Grafana dashboard tailored to the data exported by both components above.

# Installation
 1. Install dependencies needed to build
	```apt install git make gcc```
 2. Create a directory for ProxMon to live
    ```mkdir /home/monitor```
	**NOTE**: This does not create a new user. This guide does not include configuring the service to run under a different user, and will by default run it under root. See **Customizing Services**.
 3. ```cd /home/monitor```
 4. ```git clone https://git.cozyclan.xyz/dan/ProxMon.git```
 5. ```cd ProxMon```
 6. If you wish to configure the services in any way, such as running them as a new user (note on step 2) or editing the port they use, skip the remaining steps and go to the **Customizing Services** section.
 7. Run ```make install```
 8. Verify services are running: 
    ```systemctl status node-exporter.service```
    ```systemctl status proxmon-exporter.service```
 9. Congratulations, you're done. Go to the **Connecting** section.

## Customizing Services
The Makefile has various build targets that can be used for finer control over the installation process. A full list of targets can be viewed with ```make help```.

 1. Build proxmon: ```make build```. This will place the executables in the ```bin/``` folder, and generate template service files in the ```systemd/``` directory.
 2. Edit the service files in the ```systemd/``` directory to enable node-exporter features or change the ports of the components. If you would like to run these as non-root users, [ask ChatGPT](https://chatgpt.com/share/6830a1d9-5fe0-8012-abdd-076e78a12067).
 3. Install the service files: ```make install-services```. This will copy the service files from ```systemd/``` into ```/etc/systemd/system``` and will start the services in systemd. You can also use ```make reinstall-services``` if you have already installed the services and want to install updated versions of the service files.


## Running inside an LXC
This is intended to be run on the host system. However, it is probably possible to run it in an LXC. Setting up a privileged LXC would probably be the most straightforward, but an unprivileged should be possible. It would just be annoying to set up because you'd have to map UIDs/GIDs between the LXC and host. 

Either way, you will need to bind-mount the hosts root directory into the LXC, and point both node-exporter and proxmon components to read from the bind-mounted directory instead of the default ```/proc``` directory of the LXC.

If for instance you bind-mounted the hosts root directory to ```/host``` in the LXC, you could add the startup parameter to node-exporter: ```--path.rootfs=/host```
And the following startup parameter to proxmon: ```--path.rootfs /host```. See the **Customizing Services** section.

# Connecting

## Prometheus
 0. Install Prometheus if you haven't already with the [Prometheus Helper Script](https://community-scripts.github.io/ProxmoxVE/scripts?id=prometheus). Save the web URL displayed at the end of the setup script.
 1. Open your Prometheus LXC console.
 2. Edit the file ```/etc/prometheus/prometheus.yml```
 3. Under ```scrape_configs``` add the following job. You can edit the job_name as you wish. Set the IP address in the targets to the IP of  the host you wish to scrape data from.
 4. You can also edit the polling rates in the yml file. 
```
scrape_configs:
  - job_name: "node"
    static_configs:
    - targets: ['<HOST_IP>:9100', '<HOST_IP>:9101']
```
 5. Restart prometheus: ```systemctl restart prometheus.service```

## Grafana
 0. Install Grafana if you haven't already with the [Grafana Helper Script](https://community-scripts.github.io/ProxmoxVE/scripts?id=grafana). Save the web URL displayed at the end of the setup script.
 1. Login to the Grafana web interface provided at the end of the helper script
 2. On the left side, go to ```Connections->Add new connection```. 
 3. Search for and click on "Prometheus".
 4. Click ```Add new data source``` in the top right.
 5. Under ```Connection``` and ```Prometheus server URL``` paste in the web URL of your Prometheus server listed at the end of the Prometheus Helper Script.
 6. On the left side, go to ```Dashboards```
 7. In the top right, click ```New->Import```
 8. Copy the contents of ```Proxmox-Dashboard.json``` from this git repository, and paste it into the text field. 
 9. Click ```Import```